0

Your Cart is Empty

GS Watch Case - 39mm v2 [NH34-Ready]

Caseback (Fits Movement Types)
Crown
Crown Signature

BUILD YOUR OWN WATCH!
5 main components required to complete a watch.
Watch Case
Dial
Hands
Chapter Ring
Movement
Bracelet (optional)
Strap (optional)
Bridge & Rotor (optional)
Movement Holder (optional)
Tweezer (optional)

HOW TO START?

  • For the watch case, select your (1) Caseback (To fit different types of movements) and the type of (2) Crown you prefer (Browse here to see crown signature).
  • For a non-GMT watch route, select your (3) Dial, (4) Hands, (5) Chapter Ring and (6) Movement.
  • For GMT NH34 watch route, additional selection of (7) GMT 24H Hand (optional). A dial designed specially for GMT NH34 movement is also required, these can be found here .
  • To add bracelet or strap, select your (6) Bracelet or Strap (optional).
  • To decorate movement, select your (7) Bridge and Rotor (optional).
  • To have watch assembled, select (8) Assemble Watch (optional). Please note that assembling the entire timepiece requires 2 to 5 business days prior to shipping.

Engineered by us and made exclusively for us with quality assurance by ISO 9001 Certified manufacturers.

FREE WORLDWIDE SHIPPING

Second generation of GS Case 39mm.

Changes:
• Fits SKX013 Chapter Ring. This will vastly increase the modding outlook of the final piece. Chapter ring is now mandatory in this case.
Fits SKX013 Crown.
• Drilled through lug holes.
• Reshaped lugs for better bracelet fitting.

Case comes complete with double domed clear AR sapphire, caseback (solid or sapphire) and screw down crown.

Designed to fit all of our dials (28.5mm), SKX013 chapter rings and original NH movements (grey dial holding spacer). Additionally, case has ability to fit ETA2824/SW200/SW260 and ETA2893/SW330 movements. Special spacer and caseback provided.

Bracelet selections are made available in the dropdown list above or in the bracelet category .

Watch case has a water resistant of 200m.
    1. Quality Swiss Production Quality, ISO 9001 Certified
    2. Case Material 316L Stainless Steel
    3. Case Diameter 39mm
    4. Case Thickness 12.8mm (Solid Caseback), 13.3mm (Sapphire Caseback)
    5. Lug to Lug 46mm
    6. Lug Width 20mm
    7. Crown Screw down
    8. Crystal Double Domed Sapphire with Clear Anti-Reflective Coating
    9. Crystal Size 29.5mm x 1.5mm x 3mm
    10. Water Resistant 200m / 20atm
    11. Fit Movements NH34, NH35, NH36, NH38, NH72, ETA2824, ETA2893, SW200, SW260, SW330
    1. 1x Watch Case (Inclusive of sapphire and crown)
    2. 1x NH Caseback (Depends on selection)
    3. 1x ETA2824/SW200/SW260 Movement Spacer (Depends on selection)
    4. 1x ETA2893/SW330 Movement Spacer (Depends on selection)
    5. 1x ETA2824/SW200/SW260 Sapphire Caseback (Depends on selection)
    6. 1x ETA2893/SW330 Sapphire Caseback (Depends on selection)

    All photos of watches with modification parts are for illustration purposes only and are not included with modification parts purchased.

  • Recommended Mods With:

    1. Swiss Super-LumiNova® BGW9 Hands
    1. A Complete Guide On How To Mod Your SEIKO Watch Dial And Hands (Includes Photos & Video)
    2. Learn about fitting dials with four dial legs

Customer Reviews

Based on 7 reviews
86%
(6)
0%
(0)
14%
(1)
0%
(0)
0%
(0)
W
Wessam E. (Riyadh, SA)
Using this mod part for: Aftermarket case
Amazing case, failed chapter ring execution

The case design, material and finishing are simply amazing. Rivals quality from big names. Where it fails is the execution of the mandatory chapter ring, there is no way to fix the chapter ring to the case as you have to install it from the back of the case. So it was sliding around freely, even after fixing the dial the chapter ring moved and the markers became un-aligned.

P
Pedro R. (Mt. Pleasant, US)
Amazing case and products

Where do I begin? This was my first full build, that was not a kit, and I was so glad I purchased from LA. The quality is remarkable. I will be buying again for any of my modding needs.

B
Ben W. (Crawley, GB)
Using this mod part for: Aftermarket case from Lucius Atelier
Gorgeous

Never had an order from Lucius Atelier that has been anything other than fantastic.
I was asked to build a watch with a particularly personal attachment for the commissioner, and L.A. was the obvious recommendation - the parts are always finished to such a high standard, they really are the best in the game for parts for building on the NHxx base.
Lovely brushing and polishing on the case with great crisp lines, nicely proportioned, and effortless to build.
The little handwritten note from Adriel was also a lovely touch. Couldn't be happier, and the recipient of the watch is absolutely delighted.

T
Tommy T. (Lincoln, US)
Using this mod part for: Full custom mod build
Beautiful Watch!

I ordered this GS case built with all of the components that I selected. It was shipped and arrived precisely on time and it is better than I even anticipated. I am amazed at the quality of the watch, the fast shipping and the great communication every step of the process by the vendor.

J
Jonathan H. (Acworth, US)
Excellent

Very impressed with the fit and finish of this case. Well made with great polishing / brushing

F
Frederic M. (Paris, FR)
Using this mod part for: Custom build with SKX013 compatibility
Absolutely marvelous !

This case is superb. Nice polish/brushed effect. Vert well made.

M
Milanka T. (Villejuif, FR)
Very satisfied

Beautiful case, the curved back hugs the wrist and makes the watch look slimmer. The play of reflections between polished and matt is just sublime and the bevelled edges give a very luxurious case.