Stardust Dial v4 (GMT) [For NH34]

Yes, almost certainly. This is a standard Seiko mod dial — 28.5mm in diameter and 0.4mm thick, the industry-standard size — so it fits most, if not all, Seiko cases. Where a dial is shown with a particular case, that's an aesthetic pairing, not a fitment requirement. If you're unsure, the surest check is to remove your current dial and measure it with a vernier caliper.

The dial ships with four legs so it fits two different crown positions. Seiko movements come in 3 o'clock and 4 o'clock crown layouts, and the dial feet sit in different places for each. Clip off the two legs that don't match your crown position — two stay, two go.

This is a GMT layout, so it needs the Seiko NH34 — and only the NH34. The dial uses the wider 2.7mm centre hole the NH34's 24-hour GMT pinion passes through. It will physically sit on an NH35 or NH36, but a standard hour hand often won't cover the wider bore, so the movement shows through — for a clean result, use the NH34.

Applied. The hour markers are applied (raised) indices — raised metal on the dial surface, not flat print. The relief is what gives the face its depth and light play as the wrist moves.

No — this dial carries no lume. If you want the watch to glow in the dark, pair it with a set of lumed hands; the glow then comes from the hands rather than the dial face.

The fine minute markers can be. They're individually applied and extremely small, with a correspondingly tiny adhesive footprint, so they can shift or lift if pressed — handle the dial by its edges and never touch the marker surface. The logo and "Automatic" text are firmly applied and don't lift in normal handling. Because of this delicacy, dials with applied minute markers suit experienced modders.

The Stardust face is shared; the versions differ by complication — Date, No Date, Day-Date (NH36), Open Heart (NH38), and GMT (NH34). Match the version to your movement; the comparison table on each page lays them out.

Our dials carry the logo on an adhesive backing rather than a stamped or engraved mark, so it isn't baked into the surface — but removing one cleanly isn't realistic. The adhesive doesn't release without scratching or marking the dial, and the risk is greatest on enamel. We sell our dials as-is and don't modify them. You're welcome to remove it yourself or have a modding specialist do it, just knowing the face will likely pick up some cosmetic marks.

Yes, it's a limited edition, and it won't be restocked. Once the run sells out it's retired for good. The edition size is shown on the product page.

No — dials and hands are sold separately. This listing is for the dial only; choose a matching handset to complete the build. If your dial is lumed, pairing it with lumed hands in the same lume type keeps the whole face glowing together.