Grand Seiko GMT Dial - Snowflake [For NH34]

Yes, almost certainly. This is a standard 28.5mm dial — the industry-standard size for Seiko mod builds. It fits any case designed for a 28.5mm dial, whether that's a Bauhaus 33, an SKX013, or another aftermarket case. The matched case shown with a dial is an aesthetic pairing, not a fitment requirement.

The dial ships with four legs so it fits two different crown positions. Seiko movements come in 3 o'clock and 4 o'clock crown layouts, and the dial feet sit in different places for each. Clip off the two legs that don't match your crown position — two stay, two go.

Remove the two legs that don't match your movement's crown position by clipping or gently twisting them off, then seat the dial as normal. Two legs stay, two go. See the How To Mod tab for the full fitting walkthrough.

No — this version's indices are mirror-polished silver and are not lumed.

Yes, it's a limited edition, and it will not be restocked. Once the run sells out it's retired for good. The edition size is shown on the product page.

Applied. The hour indices are individually applied, mirror-polished silver — raised metal on the silvery-white snowflake texture, not flat print. The relief is what gives the dial its depth.

GMT layout, so it needs the Seiko NH34 — and only the NH34. This dial uses the wider 2.7mm centre hole the NH34's 24-hour GMT pinion passes through; a standard NH35 or NH36 won't drive the GMT complication.

It's made for the NH34 GMT movement. It will physically sit on an NH35 or NH36 — but the dial's centre hole is the wider 2.7mm bore the NH34's GMT pinion needs, and a standard hour hand often isn't broad enough to cover it, so the movement shows through the gap. A cosmetic trade-off; for a clean result, use the NH34.