Grand Seiko GMT Dial - Stardust [For NH34]

Yes, almost certainly. This is a standard Seiko mod dial — 28.5mm in diameter and 0.4mm thick, the industry-standard size — so it fits most, if not all, Seiko cases. Where a dial is shown with a particular case, that's an aesthetic pairing, not a fitment requirement. If you're unsure, the surest check is to remove your current dial and measure it with a vernier caliper.

The dial ships with four legs so it fits two different crown positions. Seiko movements come in 3 o'clock and 4 o'clock crown layouts, and the dial feet sit in different places for each. Clip off the two legs that don't match your crown position — two stay, two go.

This is a GMT layout, so it needs the Seiko NH34 — and only the NH34. The dial uses the wider 2.7mm centre hole the NH34's 24-hour GMT pinion passes through. It will physically sit on an NH35 or NH36, but a standard hour hand often won't cover the wider bore, so the movement shows through — for a clean result, use the NH34.

Applied. The hour markers are applied (raised) indices — raised metal on the dial surface, not flat print. The relief is what gives the face its depth and light play as the wrist moves.

No — this dial carries no lume. If you want the watch to glow in the dark, pair it with a set of lumed hands; the glow then comes from the hands rather than the dial face.

The Stardust face is shared; the versions differ by complication — Date, No Date, Day-Date (NH36), Open Heart (NH38), and GMT (NH34). Match the version to your movement; the comparison table on each page lays them out.

Our dials carry the logo on an adhesive backing rather than a stamped or engraved mark, so it isn't baked into the surface — but removing one cleanly isn't realistic. The adhesive doesn't release without scratching or marking the dial, and the risk is greatest on enamel. We sell our dials as-is and don't modify them. You're welcome to remove it yourself or have a modding specialist do it, just knowing the face will likely pick up some cosmetic marks.

Yes, it's a limited edition, and it won't be restocked. Once the run sells out it's retired for good. The edition size is shown on the product page.

No — dials and hands are sold separately. This listing is for the dial only; choose a matching handset to complete the build. If your dial is lumed, pairing it with lumed hands in the same lume type keeps the whole face glowing together.