Explorer Watch Case - 36mm v3 - NH [Solid] - - - Lucius Atelier - Swiss Quality Seiko Watch Mod Parts

Explorer Watch Case - 36mm v3

Name: Explorer Watch Case - 36mm v3
Brand: Lucius Atelier
SKU: EC36.v3/NH.Solid
Price: 145.0 SGD
Availability: InStock

.price-ui--loading { display: block !important; opacity: 1 !important; }

$145 SGD - $249 SGD

Caseback (Fits Movement Types)

NH [Solid] sold out

NH [Sapphire] sold out

ETA2824/SW200 [Sapphire] sold out

ETA2893/SW330 (GMT) [Sapphire] sold out

Fits All [Sapphire] sold out

Worldwide
Delivery Express
2–4 Days Replies In
1 Day 30-Day
Returns

The Explorer 36mm, Third Generation — Sapphire and Crown Included.

The third-generation Explorer Watch Case 36mm refines a classic into one of the cleanest small-case builds we make. The headline change: it now fits an SKX013 chapter ring, widening the modding range considerably.

It comes complete with a flat clear-AR sapphire and a screw-down crown — two of the fiddliest parts, handled. It also takes Swiss ETA and Sellita movements with the right spacer and caseback.

Tested to 200m. A chapter ring is required to seat the dial.

Sapphire and crown both included — the hard parts are done.
No crystal press, no crown fitting. Choose a caseback for your movement, add a chapter ring, dial, hands and movement, and build.

Clean 36mm Explorer lines.
Diameter 36mm, lug-to-lug 43mm, 20mm lugs. The understated Explorer profile that finishes almost any dial.

Now fits SKX013 chapter rings.
The third-gen change: an SKX013-spec chapter ring is required and seats the dial precisely, widening your dial and hand options.

Five movement families.
NH35, NH36, NH38 and NH72, plus Swiss ETA2824, ETA2893 and Sellita SW200, SW260, SW330 — set by the caseback you choose. The matching spacer and caseback are supplied.

Sapphire and crown included.
Flat sapphire, 29.5 × 1.5mm, clear AR, pre-installed — and a screw-down crown fitted. Rated to 200m.

Caseback	Total Thickness	Water Resistance	Best for
Solid	11.5mm	200m / 20 ATM	Slimmest profile, fully closed back
Sapphire (exhibition)	12mm	200m / 20 ATM	Show off a decorated movement

The caseback also matches your movement family — Seiko NH, Swiss ETA2824/2893, or Sellita SW200/260/330 — and ships with the matching movement spacer for your selection.

Heads up — sold separately

Chapter ring (required). An SKX013-spec chapter ring is mandatory on this case — without it the dial sits too low and the hands won’t clear. Browse compatible chapter rings .

Dial, hands & movement. Chosen separately. Match the dial and hands to your movement.

The flat sapphire crystal and screw-down crown are both included — no crystal press, no crown fitting.

Not NH34-ready

To keep this case slim, it doesn’t have the extra height the NH34’s 24-hour hand needs — so it is not NH34 GMT-ready. Run NH35, NH36 or NH38, or a Swiss ETA/Sellita movement. For a GMT build, see our GMT-ready cases.

Specs
Build Guide
What's Included
How To Mod

Dimensions
1. Case Diameter 36mm
2. Case Thickness 11.5mm (solid caseback) / 12mm (sapphire caseback)
3. Lug to Lug 43mm
4. Lug Width 20mm
Materials & Finish
1. Quality Swiss Production Quality, ISO 9001 Certified
2. Case Material 316L Stainless Steel
3. Crystal Flat sapphire, clear anti-reflective coating (pre-installed)
4. Crystal Size 29.5mm × 1.5mm
5. Crown Screw-down, included
Compatibility
1. Movements Seiko NH35, NH36, NH38, NH72 · Swiss ETA2824, ETA2893 · Sellita SW200, SW260, SW330 (not NH34)
2. Dials 28.5mm — fits all our dials
3. Chapter Rings SKX013-spec (required, sold separately)
Water Resistance
1. Water Resistant 200m / 20 ATM
The case arrives with sapphire and crown already fitted. A chapter ring is required — add it along with your dial, hands and movement to finish.

What's already in this purchase:

The watch case with flat sapphire crystal and screw-down crown both installed, plus your selected NH caseback (and the matching Swiss spacers/casebacks if you choose an ETA or Sellita movement).

The 4 parts you'll need for a complete watch:
1. Chapter ring (required first) SKX013-spec — mandatory on this case; it seats the dial at the correct height.
  Browse compatible chapter rings
2. Dial (28.5mm) The face of the watch. Match it to your movement.
3. Hands Paired with your dial.
4. Movement NH35/36/38, or a Swiss ETA/Sellita with the matching caseback. Not NH34-compatible.
Optional finishing touches:
1. Decorated bridge + rotor (only visible with a sapphire caseback) — replace the stock NH bridge and rotor with our Côtes de Genève decorated set, viewable through the caseback. Our bridges fit only our rotors (not OEM Seiko rotors), so they’re chosen as a pair. Recommended for experienced modders only.
Want it built for you?

Tick the Assemble Watch option above and we’ll handle the full build in our Singapore workshop — case fitting, movement seating, crown alignment, caseback press and a function check.

Heads up: assembled watches require 2–5 business days of workshop time before shipping.

Once your parts arrive, see the How To Mod tab for assembly tutorials.
1. 1x Watch Case (sapphire crystal and screw-down crown installed)
2. 1x NH Caseback (per selection)
3. 1x ETA2824/SW200/SW260 Movement Spacer (only if that movement is selected)
4. 1x ETA2893/SW330 Movement Spacer (only if that movement is selected)
5. 1x ETA2824/SW200/SW260 Sapphire Caseback (only if that movement is selected)
6. 1x ETA2893/SW330 Sapphire Caseback (only if that movement is selected)
Chapter ring, dial, hands and movement are selected separately to complete your build.

All photos of watches with modification parts are for illustration purposes only and are not included with the case purchase.

Which movements fit the Explorer Watch Case 36mm v3?

Seiko NH35, NH36, NH38 (and NH72), plus Swiss ETA2824 and ETA2893, and Sellita SW200, SW260 and SW330 — chosen by the caseback you pick, with the matching spacer and caseback supplied. Kept slim, this case is not NH34 GMT-ready: there isn't the height clearance for the NH34's 24-hour hand, so run NH35/36/38 or a Swiss movement. An SKX013 chapter ring is required and chosen separately.

Which caseback should I choose for the Explorer Watch Case 36mm v3?

Pick the caseback that matches your movement family — Seiko NH, Swiss ETA2824/2893, or Sellita SW200/260/330 — and the matching spacer and caseback ship with it. Choose solid for the slimmest profile at 11.5mm, or the sapphire (exhibition) caseback at 12mm to show the movement. Either is rated to 200m / 20 ATM.