Jsme průkopníkem ve vývoji a výrobě nejkvalitnějších dílů SEIKO mod. Neustále inovujeme a posouváme limity výroby číselníků. Použití pouze 100% švýcarských světelných pigmentů Super-LumiNova®. Certifikace ISO 9001.
Navrženo Modders.
Pro moddery.
Jsme průkopníkem ve vývoji a výrobě nejkvalitnějších dílů SEIKO mod. Neustále inovujeme a posouváme limity výroby číselníků. Použití pouze 100% švýcarských světelných pigmentů Super-LumiNova®. Certifikace ISO 9001.
Navrženo Modders.
Pro moddery.
POSTAVTE SI SVÉ VLASTNÍ HODINKY!
10 hlavních součástí potřebných k dokončení hodinek.
Pouzdro na hodinky
Rámeček
Vložka rámečku
Caseback
Kapitola prsten
Koruna
Krystal
Vytáčení
Ruce
Hnutí
Ručička GMT 24H (volitelně)
náramek (volitelné)
Popruh (volitelný)
Most a rotor (volitelné)
Držák pohybu (volitelný)
Pinzeta (volitelná)
POZNÁMKY:
Navrženo námi a vyrobeno výhradně pro nás se zajištěním kvality od výrobců certifikovaných podle ISO 9001 .
DOPRAVA PO CELÉM SVĚTĚ ZDARMA |
*Potřebné pružiny jsou součástí náramku a popruhu.
**Všechny fotografie hodinek s modifikovanými díly jsou pouze ilustrační a nejsou součástí zakoupených modifikačních dílů.
Doporučené mody s:
Great case for a small wrist build. I have it pictured solo and with a SKX007 pattern to make a His/Hers build set for comparison. (007 on the left with green Nato band, the Lucius Atelier 013 case build on the right in all black).
It fits standard 013 compatibilities across the board with a couple exceptions. I assume it fits a standard 013 band, but can’t confirm. Brushing and polish are beautiful. Obviously it’s a modification from the SKX013 pattern to be a slightly smaller 36mm. Standalone, the final build feels somewhat topheavy compared to the 007 that has some 42mm of width to spread out the height, but on a smaller wrist, it works way better than the larger diameter overall. Very nice changes to fit a full feature mechanical dive watch on a lady wrist.
It’s been worn pretty hard for a couple months now with no scratches visible, so I’m not disappointed in the coating. No surprise, I have a DLC socket set with no scratches either.
I have only two negatives to point out.
1 - The inside edge of the lugs should have, in my opinion, been more chamfered, or at least the edge relieved. It’s a hard 90 degree edge there. With a passthrough or nato strap, it’s held away from the skin so no problem, but I can see this being uncomfortable on a leather band.
2 - The lugs are drilled a bit small. You’ll be able to use a springbar with a 0.8mm tip (common with the flanged variety), but not one of the diver springbars with the 1.1mm tip. I’d really have liked to use the more robust style springbars.
Final thought is that it’s a well made case and worth putting in a build you care about.
Přihlaste se k odběru našeho newsletteru a získejte včasný přístup k novým kolekcím a dalším!